CuCo1Ni1Be — CW103C
CuCo1Ni1Be—CW103C (DIN 2.1285) Cobalt Nickel Beryllium Copper Alloy contains approximately 1% Cobalt, 1% Nickel and 0.5% Beryllium.
CuCo1Ni1Be — CW103C
CuCo1Ni1Be—CW103C (DIN 2.1285) Cobalt Nickel Beryllium Copper Alloy contains approximately 1% Cobalt, 1% Nickel and 0.5% Beryllium. After hot forging and heat treatment processes this material gains considerably hardness, electrical and thermal conductivity as well. It is possible to have different combinations of electrical conductivity and hardness by changing the heat treatment conditions；CuCo1Ni1Be also Offers good strength and hardness characteristics coupled with conductivity in the range of 45-60 percent of copper with ultimate tensile and hardness properties approaching 140 ksi and RB 100 respectively, all of its properties are quite the same as CuCo2Be-C17500 and CuNi2Be-C17510.
Where CW103C Is Used
Typical end uses published by Vital for this grade.
Electrical
Fuse Clips, Switch Parts, Relay parts, Connectors
Industrial
Spot Welding Electrodes, Electrode holders and Seam Welding discs in Resistance Welding, Plunger Tips in Aluminum Die Casting Machines, Injection Nozzles, Cooling Pins in Plastic Injection Machines, Mulds for Casting of Non-Ferrous Materials, Tooling for Plastic Moulds ,Butt Welding Jaws, Contact Tips for Submerged-Arc-Welding
Specifications And Material Data
| Be | 0.40-0.70% |
|---|---|
| Co | 0.80-1.30% |
| Ni | 0.80-1.30% |
| Cu | Balance |
Copper plus additions equal 99.5% minimum.
| Density (g/cm3) | 8.83 |
|---|---|
| Density before age hardening (g/cm3) | 8.75 |
| Elastic Modulus (kg/mm2 (103)) | 14.10 |
| Thermal Expansion Coefficient (20 °C to 200 °C m/m/°C) | 17 x 10-6 |
| Thermal Conductivity | 209 W/m • oK at 20 C |
| Melting Range (°C) | 1000-1070 |
1). the units are based upon Metric. 2). the typical physical properties apply to age hardened products.
Sizes And Product Forms
Available Sizes
Custom Diameter & Sizes, Random Mill lengths
Available Products And Forms
Round bars, Flat bars, Square bars, Rectangular bars, Hexagon bars, Plates, Sheets
Custom shapes are available upon request.
International Specification
| Rods/Bars/Tubes | ASTM B441, SAE J461,463; RWMA Class 3 |
|---|---|
| Sheets | ASTM B534 |
| Wires | ASTM B441 |
| Plates | ASTM B534, SAE J461,463; RWMA Class 3 |
| European Standards | CuCo1Ni1Be, DIN 2.1285; CW103C to EN |
Unless otherwise specified, material will be produced to ASTM.
Abbreviations
- ASTM — American Society for Testing and Materials
- SAE — Society of Automotive Engineers
- AMS — Aerospace Materials Specification (Published by SAE)
- RWMA — Resistance Welder Manufacturers' Association
Tempers And Mechanical Data
The Mechanical Properties will be available on request from customers.
| Rods/Bars | A(TB00),H(TD04),AT(TF00),HT(TH04) |
|---|---|
| Sheets | A(TB00),1/4 H(TD01),1/2 H(TD02),H(TD04),AT(TF00) |
| Wires | A(TB00),1/4 H(TD01),1/2 H(TD02),3/4H(TD03),H(TD04) |
| Plates | AT(TF00),HT(TH04) |
Frequently Asked Questions
Answers drawn from the Vital technical data for this page.
What is the chemical composition of CW103C?
CW103C is supplied to the following nominal composition:
- Be: 0.40-0.70%
- Co: 0.80-1.30%
- Ni: 0.80-1.30%
- Cu: Balance
What are the typical physical properties of CW103C?
Typical values published by Vital for CW103C:
- Density (g/cm3): 8.83
- Density before age hardening (g/cm3): 8.75
- Elastic Modulus (kg/mm2 (103)): 14.10
- Thermal Expansion Coefficient (20 °C to 200 °C m/m/°C): 17 x 10-6
- Thermal Conductivity: 209 W/m • oK at 20 C
- Melting Range (°C): 1000-1070
Which international specifications does CW103C meet?
- Rods/Bars/Tubes: ASTM B441, SAE J461,463; RWMA Class 3
- Sheets: ASTM B534
- Wires: ASTM B441
- Plates: ASTM B534, SAE J461,463; RWMA Class 3
- European Standards: CuCo1Ni1Be, DIN 2.1285; CW103C to EN
Can you supply mechanical property data for CW103C?
The Mechanical Properties will be available on request from customers.
Which tempers are most commonly used?
- Rods/Bars: A(TB00),H(TD04),AT(TF00),HT(TH04)
- Sheets: A(TB00),1/4 H(TD01),1/2 H(TD02),H(TD04),AT(TF00)
- Wires: A(TB00),1/4 H(TD01),1/2 H(TD02),3/4H(TD03),H(TD04)
- Plates: AT(TF00),HT(TH04)
Which product forms and sizes are available?
Custom Diameter & Sizes, Random Mill lengths Round bars, Flat bars, Square bars, Rectangular bars, Hexagon bars, Plates, Sheets Custom shapes are available upon request.
How do I request a quotation?
Email the grade, temper, dimensions and quantity to sales@vitalmaterialgroup.com. Unless otherwise specified, material is produced to ASTM.
Quote CW103C To Your Specification
Send grade, temper, dimensions and quantity. Custom shapes are available on request.