CuSn8 — C52100
CuSn8 - UNS.C52100 Phosphor Bronze Alloys, which is a 8% tin bronze distinguished by a very good combination of strength and electrical conductivity.
CuSn8 — C52100
CuSn8 - UNS.C52100 Phosphor Bronze Alloys, which is a 8% tin bronze distinguished by a very good combination of strength and electrical conductivity. It is used for connector and current-carrying springs in contacts. Among the 4-8% tin bronze C52100 exhibits the lowest electrical conductivity, the highest reachable strength is significantly higher than C51100 and C51000 and C51900. By means of an additional further tempering after the cold forming process the bendability can be further improved.
In addition, it has better corrosion resistance and good sliding properties. C52100 is used for springy components and sliding elements when increased strength and wear-resistance are required.
Where C52100 Is Used
Typical end uses published by Vital for this grade.
Architecture
Bridge Bearing Plates
Building
Thermostat Bellows
Consumer
Coinage, Cymbals, Power Conductor for Electro-Surgical Pencil
Marine
Marine Parts
Electrical
Components of Electrical Engineering,Electrical Connectors, Electronic Connectors, Cold Headed Parts, Electrical Flexing Contact Blades, Wire Brushes, Switch Parts, Fuse Clips, Frame Connectors
Fasteners
Fasteners, Lock Washers, Cotter Pins
Industrial
Automotives, Conductor Springs, Retaining Clamps, Slide Bearings,Springs, Helical Extension, Diaphragms, Doctor Blades, Paper Industry, Bourdon Tubing, Thrust Bearings, Clutch Disks, Welding Wire, Well Drill Equipment, Beater Bar, Springs, Helical Torsion, Clips, Gears, Pinions, Bellows, Truss Wire, Pneumatic Hammers, Cold Headed Parts, Textile Machinery, Perforated Sheets
Specifications And Material Data
| Sn | 7.50-8.50% |
|---|---|
| P | 0.03-0.35% |
| Zn | 0.20% Max. |
| Fe | 0.10% Max. |
| Pb | 0.05% Max. |
| Zn | Balance |
Copper plus additions equal 99.50% minimum.
| Specific Gravity | 8.80 g/cm3 |
|---|---|
| Coefficient of Thermal Expansion per °C | 18.20 x 10-6 (20-300°C) |
| Electrical Conductivity (% IACS) | 13.00 % @ 68 F |
| Thermal Conductivity | 36.00 Btu · ft/(hr · ft2·oF)at 68F |
| Modulus of Elasticity in tension | 16000 ksi |
1). the units are based upon US Customary. 2). the typical physical properties apply to age hardened products.
Sizes And Product Forms
Available Sizes
Custom Diameter & Sizes, Random Mill lengths
Available Products And Forms
Round bars, Flat bars, Square bars, Round Wires, Round Strips
Custom shapes are available upon request.
International Specification
| Rods/Bars/Strips | UNS.C52100, CDA521, ASTM B139, B103, B888, B159 |
|---|---|
| European Standards | CuSn6, JIS C5210, CW 453 K, PB 104 |
Unless otherwise specified, material will be produced to DIN & RWMA.
Abbreviations
- ASTM — American Society for Testing and Materials
- RWMA — Resistance Welder Manufacturers' Association
Tempers And Mechanical Data
The detailed Mechanical Properties will be available on request from customers.
Frequently Asked Questions
Answers drawn from the Vital technical data for this page.
What is the chemical composition of C52100?
C52100 is supplied to the following nominal composition:
- Sn: 7.50-8.50%
- P: 0.03-0.35%
- Zn: 0.20% Max.
- Fe: 0.10% Max.
- Pb: 0.05% Max.
- Zn: Balance
What are the typical physical properties of C52100?
Typical values published by Vital for C52100:
- Specific Gravity: 8.80 g/cm3
- Coefficient of Thermal Expansion per °C: 18.20 x 10-6 (20-300°C)
- Electrical Conductivity (% IACS): 13.00 % @ 68 F
- Thermal Conductivity: 36.00 Btu · ft/(hr · ft2·oF)at 68F
- Modulus of Elasticity in tension: 16000 ksi
Which international specifications does C52100 meet?
- Rods/Bars/Strips: UNS.C52100, CDA521, ASTM B139, B103, B888, B159
- European Standards: CuSn6, JIS C5210, CW 453 K, PB 104
Can you supply mechanical property data for C52100?
The detailed Mechanical Properties will be available on request from customers.
Which product forms and sizes are available?
Custom Diameter & Sizes, Random Mill lengths Round bars, Flat bars, Square bars, Round Wires, Round Strips Custom shapes are available upon request.
How do I request a quotation?
Email the grade, temper, dimensions and quantity to sales@vitalmaterialgroup.com. Unless otherwise specified, material is produced to ASTM.
Quote C52100 To Your Specification
Send grade, temper, dimensions and quantity. Custom shapes are available on request.